Find the best power meters at Escapa. TheFavero Assioma Uno Power Meter Pedalsare now available,acycling power meter with a power sensor in the left pedal. (The set includes both pedals, but only the left one has the sensor).

AT ESCAPA WE HIGHLIGHT:

• Facilo to install
You can install and transfer your Assioma power meters from one bike to another just like normal pedals, easily and without additional tools. Just screw them onto the crank arms and you're ready to ride!

• Bluetooth and ANT+ SMART
It communicates via Bluetooth and ANT+ with bike computers and smartphones, both Android and iOS.

• Accuracy and consistency
Provides accurate watt measurements with great consistency and stability in real road conditions, and at any temperature between -10°C and 60°C.

• Waterproof, durable, and lightweight
Assioma is the lightest pedal-based power meter ever made. Thanks to its compact design, it never interferes with pedaling. Not even when cornering. The power sensors are protected in a two-component resin block, extremely shock-resistant and completely waterproof.

• Rechargeable and green
Assioma is the only pedal-based power meter with integrated rechargeable batteries; a single charge guarantees at least 50 hours of use.

• Tested and guaranteed
Favero Electronics produces each Assioma in-house and thoroughly tests it individually.

FEATURES:

• Power sensor in the left pedal

• Cadence sensor: included, built-in

• Total weight per pedal: 149.5 g (battery included)

• Battery type: rechargeable lithium battery

• Battery life: at least 50 hours

• Radio communication: Bluetooth v4.0 profile, ANT+ PWR (CT+PO)

• Power measurement accuracy: ± 2%

• Temperature compensation: -10°C / +60°C

• Compatible cleats: Original Look Kéo and Favero cleats (red and black)

• Bike type: racing/road

• Designed and manufactured in Italy

• Warranty: 2 years Package contents:

• Left pedal with power sensor

• Right pedal without power sensor

• Battery charger, including plugs (EU, US, UK, AU)

• 1 two-meter micro-USB/USB cable with magnetic connector

• 2 red 6° cleats (compatible with LOOK Kéo)

• Hex key and 4 washers for installation

• User manual For more information, visit cycling.favero.com.

POWER METER:

Left/right balance: indicates, as a percentage, the individual power generated by the left and right legs.

The L/R Power Balance values allow you to monitor the dominant/non-dominant leg ratio and observe how this varies in relation to different riding conditions and physical condition. This can be useful for correcting penalizing imbalances, including in post-traumatic rehabilitation programs.

Unlike others, Assioma power meter pedals return these metrics through actual double-sided measurements, not estimates.

CADENCE:

Indicates the number of revolutions made by the pedal in one minute (rpm).

Assioma's integrated cadence sensor constantly detects and transmits this value to the bike computer: therefore, it is unnecessary to use a separate cadence sensor.

Torque Efficiency (TE): indicates, as a percentage, the amount of power generated during a pedal stroke that actually contributed to the cyclist's propulsion.

This value is based on the Positive Power (P +), which pushed the pedal forward, and the Negative Power (P -), which pushed in the opposite direction, applied to the crank at each revolution.

Negative power can be counteracted by helping the foot "come back up" in the recovery phase: pulling it up by the clipped-in shoe.
100% torque effectiveness occurs when no negative power has been accumulated during a pedal stroke. The typical TE value can vary between 60% and 100%.
Assioma UNO indicates the Torque Effectiveness value for the left leg, while Assioma DUO provides data for both the left and right legs.

Pedal Smoothness (PS): indicates, as a percentage, how evenly power is distributed over a complete revolution of a pedal stroke. A value of 100% means that power is delivered consistently throughout the entire revolution: the higher the value, the more "rounded" the pedaling will be.